Technical

Documentation for design, installation, and maintenance

Click one of the following items to jump to that section:

Click HERE to view our Technical Blog.

Click HERE to view our Technical FAQ.


Installation

Manuals

Below are the primary documents to use when installing Lonseal products.

Click the document name to download.

Interior Flooring Manual
This document provides all the necessary requirements and recommendations for the majority of installations.

Londeck Manual
This document is intended for exterior building installations of the Londeck product line.

Checklists

Below are some helpful checklists that may be used by installers when purchasing Lonseal products for their installation.

Click the document name to download.

Commercial Interiors Installer’s Checklist
This document is for use with interior installations, including elevators and fixtures.

Londeck Installer’s Checklist
This document is for use with all exterior Londeck installations.  If Londeck is being installed as an interior flooring, please refer to the Commercial Interiors Installer’s Checklist above.

Specialty Installer’s Checklist
This document is for installations that are not typical, commercial interior installations, such as temporary installs, raised panel systems, or vehicles.

Guides

Lonseal flooring may be installed in a variety of settings, from healthcare and gymnasiums to aircraft and boats.  Special installation instructions for these types of applications, including product related instructions, are below.  They are intended to be a supplement to the Interior Flooring Manual above.

Click the document name to download.

Aircraft
For use with all aircraft installations (airplanes, helicopters, etc.).

Elevator
For use with all installations in passenger elevators.

Exhibits & Show Floors
For use with temporary or short-term installations.

Fitness Flooring
For use with Lonseal’s fitness flooring (Loncourt I, Loncourt UV, Lonwood Performa, and Lonwood with Foam).  This guide also addresses installations that will use rolling bleachers or game line paints.

Fixtures
For use with all cabinet, counter, display, or fixture installations.

Flash Coving
For use when flash coving Lonseal flooring.

Hot Yoga Studio
For use when installing in hot yoga studios.

Lonmat
For use with all Lonmat installations in marine or naval vessels.

Lonsafe
For use when installing Lonseal flooring with the Lonsafe underlayment.

Marine
For use with all marine installations (excludes Lonmat, which should use the guide above).

Patient Room
For use in all healthcare patient room installations, where patient beds are expected.  This guide should also be used in settings where heavy point loads are expected, such as diagnositc equipment.

Raised Panel Systems
For use when installing over a raised panel system.

Stairs
For use with all interior stair installations.

Vehicle
For use with all ground vehicle installations, including RVs, trailers, and mobile command centers.

Wood Grain Products
For use with all wood grain patterned products.


Maintenance

Maintenance Guides

The guides below provide the necessary requirements and recommendations for use with Lonseal flooring. For the Londeck product line, this information only applies to fully interior installations. For all other Londeck installations, follow the maintenance information in the Londeck Manual.

Use the drop-down to select your floor and the appropriate guide will be downloaded. The appropriate guide is also available on the product specific pages. If a product you are looking for is not shown or if you have questions, please contact Lonseal’s Technical Department.

The individual guides may also be downloaded by clicking the document name below.

Unfinished Flooring
This document is used for any Lonseal flooring without a factory-applied finish.

Topseal
This document is used for any Lonseal flooring with Topseal, Lonseal’s factory-applied urethane finish.

High Gloss Finish
This document is used for any Lonseal flooring with a high gloss, factory-applied urethane finish. Products using this guide will have “UV” at the end of their product name (e.g. Loncourt UV or Lonstage UV).

Recommended Maintenance Products

Click the link below to download a chart showing all the products tested and approved for use with Lonseal’s flooring by the manufacturers listed. Any questions regarding these products and their use should be directed to the listed manufacturer.

Download chart

Lonseal does not stock any maintenance products. Instead, Lonseal has partnered with 1877FloorGuy.com to provide you with appropriate floor care products. Click on the logo below for direct purchase. For inquiries regarding product use, call 877-356-6748 or email them.

Visit 1-877 Floor Guy

Product Specifications

For individual product specifications, select the floor from the drop-down below. These documents are also available on each product’s individual page. If a product you are looking for is not shown, please contact Lonseal’s Technical Department.

If you are looking for a CSI 3-Part Specification for use in contract documents, please contact Lonseal’s Technical Department.  When contacting, please include the name and type of project, along with the flooring being used in order to better assist you.

CSI section 09 65 13.23 Vinyl Sheet Flooring is available for all interior installations, and CSI section 07 18 13 Pedestrian Traffic Coatings is available for exterior Londeck installations.


Sundries

Below are the Technical Data Sheets (TDS) and Safety Data Sheets (SDS) for Lonseal’s sundries.

Click on either TDS or SDS below to download the appropriate document.

Adhesives

#180 DeckHold Adhesive    [ TDS | SDS ]
For use with exterior, building installations of Londeck only.

#400 Contact Adhesive    [ TDS | SDS ]
For use in all non-horizontal installations of Lonseal flooring or where instant bond is desired.

#650 Two-Component, Solvent Free Epoxy Adhesive    [ TDS | SDS ]
For use in all installations where extreme conditions will exist after installation.

#813 Sheet Vinyl Adhesive    [ TDS | SDS ]
For use with fully interior, building installations of Lonseal flooring.

Seam Treatments

Lonsealer    [ TDS | SDS ]
For use with fully interior, building installations of Lonseal flooring, as an alternative to heat welding.

Welding Thread    [ TDS | SDS ]
For heat welding seams of Lonseal flooring.

Tapes

Double Face Tape (DFT)    [ TDS | SDS ]
For use in fully interior, building installations. Required when using Lonsealer or when heat welding less than 24 hours after installation is necessary.

Lontape    [ TDS | SDS ]
For use in all installations of Lonseal flooring.

Show Tape    [ TDS | SDS ]
For use in all installations of Lonseal flooring.

Trims

Lonmarine® Trim    [ TDS | SDS ]
For use with Lonseal’s marine flooring.


Technical Bulletins

The following bulletins contain supplemental information relating to products or installation.

Click the document name to download.

Aircraft Flooring: Part Number Description
This document breaks down how the aircraft part numbers are set up.  For additional, detailed information on Loncoin II Featherweight, please refer to this bulletin.

Aquaflex® Waterproof Flooring Installation System
This document is available to show that Aquaflex® is approved for use with Lonseal flooring products.

Chemical Weld Guide
This guide is based on the Lonsealer TDS, but also includes photos for additional clarification.1

Heat Weld Guide
This guide is based on the Welding Thread TDS, but also includes photos for additional clarification.1

Lexel® Clear Sealant
This document is available to show that Lexel® Clear Sealant is approved for use with Lonseal flooring products.

Spray-Lock® 3500 Spray Adhesive
This document is available to show that Spray-Lock® 3500 is approved for use with Lonseal flooring products.

Tool List
The chart shows all tools sold and rented by Lonseal.

Welding Thread List
This list contains all available welding thread for Lonseal products.

West System® Epoxy
This document is available to show that West System® Epoxy has been approved for use with Lonseal flooring products.  It is also includes the recommended application method when used with Lonseal flooring.

1Information within the product’s TDS will always supersede information in this guide.


Warranties

Below are all the current Lonseal warranties. Except as noted below, the applicable warranty will be per the installation location. If you are unsure which warranty will apply to your installation, please contact Lonseal’s Technical Department.

Click the document name to download.

Commercial Interiors Limited Warranty
This 1-year defect, 10-year wear warranty applies to all fully interior installations.2

Building Exteriors Limited Warranty
This 1-year defect, 15-year wear warranty applies to all exterior installations of Londeck.

Transportation Limited Warranty
This 1-year defect, 5-year wear warranty applies to all transportation installations (aircraft, marine, vehicle, etc.).

Lonwood Performa Limited Warranty
This 1-year defect, 15-year wear warranty applies to all fully interior, fitness installations of Lonwood Performa.

2Installations of Lonwood Performa will use the product specific warranty above.


Technical Videos

Chemical Welds
This video demonstrates the use of Lonsealer to chemically weld Lonseal flooring.

Heat Welds
This video demonstrates how to heat weld Lonseal flooring. It has two parts, one showing the use of a urethane nozzle, and the other showing the use of a standard speed nozzle and glazing of the welding thread.

Overlap Welds
This video demonstrates how to overlap weld Londeck using a 40 mm wide slot nozzle.